Guide For CBD Newbies: How To Use CBD E-liquids

3 min

From oils, edibles and capsules to e-liquids, drinks and creams, it is true that nowadays, CBD products are available in various forms. Whether you prefer to add a couple of drops of CBD oil to a smoothie or salad, pot them under your tongue or massage some CBD lotion on the skin, you can choose the right CBD product and method of intake according to your needs and habits. And while adding the oil or apply a cream sounds easy, what about e-liquids? Vaping CBD e-liquids is one of the fastest and most effective methods to consume this beneficial compound. However, beginners are often afraid to use it because they don’t know how to determine the dose or which device to take. This article is going to answer all these questions.

First of all, let’s clarify that we don’t speak about vaping CBD oil here. Please remember that not all CBD-infused oils are designed for vaping. Some of them are for oral consumption only. We’re referring to CBD e-liquids that can be safely taken by inhalation.

What Is CBD E-liquid Made Of?

Actually, CBD e-liquid is similar to conventional e-liquids, except it contains cannabidiol, also known as CBD. It contains the following ingredients:

  • CBD;
  • Propylene Glycol (PG);
  • Vegetable Glycerin (VG);
  • Flavourings.

How To Find Your Perfect CBD Dosage

Inexperienced users don’t know which strength to take and how much to vape. When determining CBD dosage, you should take into account a lot of factors, such as the severity of the condition, body chemistry and body weight, to name a few. The best advice here is to always start low and go slow. Gradually raise the dose until you find those that suit you best.

When buying the bottle of your CBD vape juice, vape oil, or any other CBD infused e-liquid, look at the potency expressed in mg and at the size of the bottle in mL. Divide the amount of milligrams by the amount of millilitres to learn the strength in mg per mL. Then learn the liquid capacity of your device.

Example: Your 30 ml bottle of CBD e-liquid contains 1000 mg of cannabidiol. Divide 1000 by 30, and you’ll get 33. So, each mL of your bottle has 33 mg of CBD. If you put that into your 1 mL vaping device, this means you have 33 mg of CBD in it. If your device holds more than 1 mL, multiply 33 mg by the total capacity of your device. The total CBD content of your 2 mg device will be 66 mg. Bearing this information in mind, you will easily determine your CBD dosage.

How To Choose A Vaping Device

The market offers a huge number of devices used to vape CBD e-liquids, due to which newbies often feel at a loss. The best options for them are pods, cartridges and disposables.

CBD pod is a small cartridge that can be put into a compatible device. It is easy to use and charge them. They are usually applied once. This means people don’t have to refill or upload the compartment with CBD e-liquid; they simply throw these devices away when they’re done.

CBD vape cartridges represent a slim cylindrical vape tank that is pre-filled with CBD e-liquid. It is compatible with standard vape pens and 510 cartridges, thanks to 510 threading. CBD cartridges usually hold 0.5-1 mL of CBD e-liquid.

Disposable CBD vape pens are the cheapest and easiest way to the CBD vaping world. It looks like a cigarette pre-filled with CBD e-liquid. Disposable CBD vape pens are equipped with a battery and built-in coil. You will be able to make a few hundred puffs before you need to replace your device.

How To Vape CBD E-Liquid

Vaping CBD e-liquid is super easy. All you need is just to draw the vapour into your mouth and then exhale it. Some vaping devices are draw-activated, while others require you to push the button.

How To Use A CBD Pod:

  • Connect the device to the JUUL battery;
  • Since the JUUL is draw activated, you can start by taking a small puff;
  • Wait for 5 to 10 minutes between puffs to see how CBD e-liquid affects you;
  • If everything is OK, you can take more frequent and larger puffs;
  • Tap the JUUL twice to check the battery life.

How To Use A CBD Vape Cartridge:

  • Connect the device to the 510 battery;
  • Switch on the device;
  • Take small puffs at first;
  • Wait for 5 to 10 minutes between puffs to see how CBD e-liquid affects you;
  • If everything is OK, you can take more frequent and larger puffs.

How To Use A Disposable CBD Vape Pen:

  • Fill your disposable CBD vape pen with CBD e-liquid;
  • Prime the coil for optimal performance;
  • Wait for 5 to 10 minutes until the coil saturates;
  • Switch on your device;
  • Take small puffs at first;
  • Wait for 5 to 10 minutes between puffs to see how CBD e-liquid affects you;
  • If everything is OK, you can take more frequent and larger puffs;
  • Always remember to clean your vape pen on a regular basis.

What Is The Best Temperature To Vape CBD E-Liquid?

It’s revealed that cannabinoid degrades at 230 ºC. That’s why it’s better to vape CBD e-liquid at around 200-220 ºC. It’s not recommended to lower the temperature, either. In this case, you will have no vapour to inhale.

What Is The Best Wattage For Vaping CBD E-Liquid?

Keep the wattage low because too high watts will make the coil too hot and spoil; your CBD e-liquid. It should be at around 10-30 watts.

Is It Safe To Vape CBD E-Liquids?

As the World Health Organisation found that CBD is well-tolerated by people, we can say that vaping CBD e-liquid is safe. However, if you have some health issues or any concerns, talk with your doctor before buying and using any CBD products.

How Often Should You Vape Your CBD E-Liquid?

You can vape CBD e-liquid every day, in the morning or at night. You can do it when you are suffering from anxiety, pain, insomnia or other symptoms that can be revealed by CBD.

Leave your vote


Your email address will not be published. Required fields are marked *

Log In

Forgot password?

Forgot password?

Enter your account data and we will send you a link to reset your password.

Your password reset link appears to be invalid or expired.

Log in

Privacy Policy

Add to Collection

No Collections

Here you'll find all collections you've created before.